moVear GLASS mSHIELD 3D PRO MATT for Apple iPhone 6 Plus / 6s Plus (5.5") | (Anti-reflective)

Product features:

moVear GLASS mSHIELD 3D PRO MATT
Tempered glass for Apple iPhone 6 Plus / 6s Plus (5.5"), full screen, anti-reflective surface

Set contains:

• 1 pc. moVear GLASS mSHIELD 3D PRO MATT tempered glass for the iPhone 6 Plus / 6s Plus (5.5")
• 1 pc. alcohol wipe
• 1 pc. microfiber cloth
• 1 pc. sticker for removing dirt from the screen
• Installation manual (PL / EN / DE)
• Original elegant hard box

Check the phone model and screen size

Pay attention to the model and size of the smartphone screen. Glass only compatible with Apple iPhone 6 Plus / 6s Plus z ekranem o przekątnej 5.5 cala.

The dimensions of the device are: 158,2 x 77,9 x 7,3mm.

With 3D PRO edges / Protects the entire screen

Matt glass moVear 3D PRO MATT has been designed and made to protect the entire display - along with its rounded edges (unlike the classic 2.5D glass where tempered glass only protects the flat surface of the screen).

The appearance and size of the glass on the phone The picture on the right shows what area of the screen is covered by the moVear GLASS mSHIELD 3D PRO MATT and 2.5D tempered glass for the telephone iPhone 6 Plus / 6s Plus.

Easy to install

The use of high quality adsorption surface ("glue") under the entire * (98%) glass surface ensures perfect adhesion, excellent touch sensitivity and high comfort of use.
(* expansion joint at the edge of the glass)

Matte, anti-reflective surface

The matte surface of the 3D PRO MATT tempered glass is a guarantee of better comfort of using the phone in conditions of intense contrasting lighting. Glass reduces glare on the screen Apple iPhone 6/6s Plus.

Durable screen protector

The combination of five layers reduces the susceptibility to cracks and crushing. It absorbs impact energy, protects the iPhone 6 Plus / 6s Plus (5.5") screen and reduces the risk of damage to the display when the smartphone falls.

1. Oleophobic coating
2. Anti-reflection coating
3. Tempered glass
4. Strengthening layer, anti-crushing
5. Adsorption layer (" glue ")

With oleophobic coating

The use of an oleophobic coating on the entire surface of the mSHIELD 3D PRO MATT glass makes the frosted surface of the glass for iPhone 6 Plus / 6s Plus (5.5") easier to maintain. It makes it harder for dirt to adhere, and fingerprints and other dirt from use can be cleaned more easily.

Compatible with some cases

The glass for the entire screen GLASS mSHIELD 3D PRO MATT is compatible with most cases that are not too tightly built-up. If the case is hard and touches the edge of the glass, it should not be used with it as it may damage the edge of the glass. The glass is compatible with the moVear case.

Newest technologies

Protective glass GLASS mSHIELD 3D PRO MATT for Apple iPhone 6/6s Plus (5.5") is produced with the use of the latest technologies, thanks to which you receive a product of the highest quality.

Installation guide

1. Clean the screen thoroughly with a damp cloth.
2. Wipe the screen dry with a microfiber cloth.
3. Gently remove the protective plastic layer from moVear GLASS mSHIELD 3D PRO MATT, exposing the surface that will adhere to the display. Remember not to touch any exposed surface!
4. If necessary, use the "dust remover" leaflet to remove any remaining particles from the screen.
5. Position the tempered glass over the screen, and then carefully place it on the display. Pay attention to the function holes.
6. Press the center of the glass to help it stick firmly to the screen.
7. Using a microfiber cloth, push any remaining air from under the glass towards the nearest edge. Then press its edges carefully and clean the surface.

Now your Apple iPhone 6 Plus / 6s Plus (5.5") screen is properly protected!